Table of Contents
Advertisement
Function Description/Driver Start
Picture: Connection of air valves
The driver is activated immediately when air is connected. The flow rate of
the air valves must not be below 0,6 m³/min.
5 Assembly - Disassembly
Disassembly: (see Spare Parts Drawing)
Prior to disassembly, disconnect equipment from air
supply! Only experienced maintenance personnel may
assemble or disassemble this equipment.
After repair or maintenance, verify that equipment runs to specification!
Principally, use only DEPRAG original spare parts. Otherwise, a reduction
in equipment power-output and an increased maintenance-requirement
occurs. If NON-DEPRAG parts are installed, DEPRAG is justified to void
any existing warranty and liability obligations.
Attention:
Motor- and gearing parts may be damaged if dropped!
15
Advertisement
Table of Contents
