Connection Options For The Pressure Hose - Deprag MINIMAT 346-237U Operating Instruction Booklet

5.3. Connection Options for the Pressure Hose

There are 3 options to connect the pressure hose (hose i.d. 6 mm / ¼") onto the screw-
driver by means of the supplied quick release coupling 804251.
Lower air-inlet (Standard)
Rear air-inlet
Upper air-inlet
Installation steps
Always lightly grease the o-rings.
1. Disassemble the cover 407372 (internal
hex. AF 8, right-hand thread) with the
o-ring 802477
o-ring
802477
2. Assemble the quick release nipple 804289
(AF 19, right-hand thread) with the o-ring
802477 and the seal ring 811332 as nee-
ded (behind or above) onto the pistol grip.
seal ring
811332
3. Seal off the unused air-inlet of the pistol
grip with the cover 407372 (internal hex.
AF 8, right-hand thread) and the o-ring
802477.
o-ring
802477
11
cover
407372
o-ring
quick release
802477
nipple 804289
cover
407372