Table of Contents
Advertisement
8.
Mont the o-ring 807647, the disc 326962 and the lock ring 800387 (service tool: suit-
able plier) onto the interior motor package.
9.
Attach the reverse handle 400271 (with o-ring 802478) onto the pistol grip by means
of the screw 400284 (right-hand thread).
CAUTION
The screw 400284 may become loose and cause injuries.
Glue in the screw (e.g. with Loctite 222) !
10. Mount the valve pin 402983.
11. Insert the clutch into the clutch bearing.
12. Tighten the clutch bearing complete with the spring sleeve (optional equipment) onto
the screwdriver (left-hand thread).
NOTICE
The claw of the clutch must engage with the claw of the spindle (located in
clutch bearing).
The hex of the clutch shaft must engage with the hex of the spindle
(located in gearing).
23
Advertisement
Table of Contents
