Technical Description - DELTA LOGIC ACCON-NetLink-PRO User Manual

1

TECHNICAL DESCRIPTION

ACCON-NetLink-PRO compact is a handy communication and
programming adaptor between PC and S7 controllers. The electronics of
the ACCON-NetLink-PRO compact is placed in a PROFIBUS plug's case.
Thus, the adapter is very small and handy.
As all-rounder, the ACCON-NetLink-PRO compact can be connected to
the PLC via MPI, PROFIBUS and PPI. The ACCON-NetLink-PRO compact
independently detects the current bus settings of the PLC.
The ACCON-NetLink-PRO compact's communication to the PC is carried
out via TCP/IP. The configuration of the ACCON-NetLink-PRO compact
can be created and changed via its integrated web site. For security
reasons the access to the web site is protected by a password.
The ACCON-NetLink-PRO compact supports the S7 communication via
RFC1006 (ISO on TCP). Thus TCP/IP communication processors (e. g.
CP343-1) can be replaced by this adapter. But projected connections are
not supported. Furthermore the ACCON-NetLink-PRO compact supports
the parametrization of DP-Slaves via DP-V1 (Class 2). A driver for
SIMATIC applications (ACCON-S7-NET) is included in delivery. The
ACCON-NetLink-PRO compact is fed via the bus connection.
Alternatively, the device can be externally supplied via 24 VDC.
The ACCON-NetLink-PRO compact can be connected to the PC via a hub
or switch or directly with the supplied patch cable (Cross-Link).
ACCON-NetLink-PRO compact 3