DELTA LOGIC ACCON-NetLink-PRO User Manual page 36

TCP/IP status:
IP address
Subnet mask
Gateway
Listen on port
DHCP
DHCP timeout
Configured via
DHCP
Connected to
client address
Security interface
ON/OFF
Currently used
TCP connections
MPI/PROFIBUS Settings
Go Online after boot up
ACCON-NetLink-PRO compact
Current IP address of the ACCON-NetLink-PRO
compact
(e. g. 192.168.4.54).
Current subnet mask of the ACCON-NetLink-PRO
compact (e. g. 255.255.255.0).
Current standard gateway of the ACCON-
NetLink-PRO compact (e. g. 192.168.4.33).
The TCP port on which the ACCON-NetLink-PRO
compact can be reached. The default port is
7777.
Shows if DHCP is activated or not
If DHCP is »ON« there is the additional
information if DHCP was successful or if the
parametrized default IP address is used.
Shows the DHCP timeout in seconds
Shows if the IP address is given from a DHCP
Server
IP address which is connected to the NetLink.
Shows if the Security interface is activated.
The amount of open TCP connections is shown
here.
Shows if the NetLink connects
automatically with RFC1006 after it boots
up or not (»ON« or »OFF«). If activated
(»ON«) further parameters are visible.
35