DELTA LOGIC ACCON-NetLink-PRO User Manual page 2

This manual is for project developers, users and assemblers who utilize
the ACCON-NetLink-PRO compact.
It shows the user the handling of the ACCON-NetLink-PRO compact and
explains signaling functions. All necessary data for assembling should be
provided to the assembler. © 1995 - 2016
DELTA LOGIC Automatisierungstechnik GmbH
Stuttgarter Strasse 3
73525 Schwaebisch Gmuend
Germany
Phone sales:
Phone support:
Fax sales:
Fax support:
E-Mail sales:
E-Mail support:
www.deltalogic.de
All rights reserved. No part of this work is allowed to be copied, reproduced, conferred,
processed and stored into electronic media or translated into any other language without a
written permission of the author.
STEP®, TIA®, TIA Portal®, S7-200®, S7-300®, S7-400®, HMI®, STEP® and SIMATIC® are
registered trademarks of Siemens AG, ACCON® and DELTALOGIC® are registered trademarks
of DELTA LOGIC Automatisierungstechnik GmbH.
Note:
We have checked the content of this manual for conformity with the hardware and software
described. Nevertheless, because deviations cannot be ruled out, we cannot accept any
liability for complete conformity. The data in this manual have been checked regularly and
any necessary corrections will be included in subsequent editions. We always welcome
suggestions for improvement.
Last update 2016-09-26. All technical changes reserved.
ACCON-NetLink-PRO compact
+49-(0)7171-916-120
+49-(0)7171-916-112
+49-(0)7171-916-220
+49-(0)7171-916-212
sales@deltalogic.de
support@deltalogic.de
1