DELTA LOGIC ACCON-NetLink-PRO User Manual page 38

Configuration page
The ACCON-NetLink-PRO compact can be configured via this page.
Before opening this page you have to enter the correct device name
(»ACCON-NetLink-PRO compact«) and the password (see below).
Figure 23: User name and password
The user name and the password are case-sensitive!
Default values since firmware 2.58
User name: ACCON-NetLink-PRO compact
Password: consists of the last 8 Hex characters of the device MAC
address. This information is printed on the NetLink housing.
Example: MAC address: 00:06:71:19:1B:FC
resulting password: 71191BFC
Since NetLink firmware version 2.58, the user must define an
individual password when calling up the web interface for the first
time. This must then be saved in the NetLink.
Note: The default password „admin" from older device versions may no
longer be used. The new password to be set by you have to use 5 - 8
characters and spaces are not permitted.
Default values before firmware 2.58
User name: ACCON-NetLink-PRO compact
Password: admin
ACCON-NetLink-PRO compact 37