Communication Via Rfc1006 (S7-Tcp/Ip) - DELTA LOGIC ACCON-NetLink-PRO User Manual

8

COMMUNICATION VIA RFC1006 (S7-TCP/IP)

RFC1006 is an official standard and supported by many manufacturers.
Lots of manufacturers of visualizations are using this protocol to access
S7 controllers via Siemens' Ethernet CPs (e. g. CP343-1 or CP443-1).
The following software with RFC1006 support has been tested with the
ACCON-NetLink-PRO compact:
•
WinCC V6.0 (Siemens AG)
•
ZenOn V6.2 (COPA-DATA)
•
PROCON-Win V3.2 (GTI Control)
•
DELTA LOGIC S7/S5-OPC-Server from V3.1 (DELTA LOGIC GmbH)
•
ACCON-AGLink40 (DELTA LOGIC GmbH)
• INAT-OPC-Server (INAT GmbH)
•
WinCE 5.0 Terminal TP21AS (Sütron Electronic GmbH)
•
InTouch V9.5 (Wonderware GmbH)
The communication with S7-200 controller over RFC1006 is not
supported.
Configuring the RFC1006 option
RFC1006 can be used anytime.
In the web interface is an option »Go online after boot up«. It can be
used to automatically log in the ACCON-NetLink-PRO compact on bus
after it boots up. This option doesn't have to be activated to
communicate with RFC1006.
ACCON-NetLink-PRO compact 25