Vf-1024 Board - Sony ILME-FX6V Service Manual

2-10. VF-1024 Board

Preparation
1. Remove the top cabinet and the bottom cover. (Refer to "2-2. Top Cabinet, Bottom Cover".)
2. Remove the inside panel. (Refer to "2-3. Inside Panel".)
3. Remove the outside panel. (Refer to "2-4. Outside Panel".)
4. Remove the VC shield plate assembly. (Refer to steps 1 to 6 in "2-5. VC-1046 Board".)
Procedure
1. Disconnect the flexible board from the connector (CN7500) on the VC-1046 board.
2. Release the hole of the flexible board from the boss, and then open the flexible board.
VC-1046 board
Hole
Flexible board
Boss
CN7500
91