2-8. CK-1027 Board
Preparation
1. Remove the top cabinet and the bottom cover. (Refer to "2-2. Top Cabinet, Bottom Cover".)
2. Remove the inside panel. (Refer to "2-3. Inside Panel".)
3. Remove the VC shield plate assembly. (Refer to steps 1 to 6 in "2-5. VC-1046 Board".)
Procedure
1. Disconnect the flexible board from the connector (CN7500) on the VC-1046 board.
2. Release the hole of the flexible board from the boss, and then disconnect the flexible board.
Flexible board
Hole
VC-1046 board
Boss
CN7500
86