Table of Contents
Advertisement
3. Peel off the tape AS from the SDI shield case.
Note
The tape AS is not reusable.
4. Disconnect the flexible flat cable from the connector (CN1503) on the HD-1006 board.
Attaching position of the Tape AS and
arrangement of flexible flat cable
Shield case
Mountain fold
Note
•
Align the mountain fold portion of the flexible flat cable with the edge of the shield case.
•
Attach a new tape AS at the position as shown in the figure.
Tape AS
Tape AS
HD-1006 board
CN1503
Flexible flat cable
103
Advertisement
Table of Contents
