Table of Contents
Advertisement
3. Remove the two toggle packings.
4. Remove the screw, and then remove the TG-1005 board.
5. Disconnect the flexible flat cable from the connector (CN001) on the TG-1005 board.
ISO button plate
Bosses
Reinforcing plate side:
TG-1005 board
Holes
CN001
Flexible flat cable
Pins of the connector
P1.7 x 3
Toggle packings
Note
Cut the pins on a new TG-1005 board to a length of 1.2 mm or less.
58
Advertisement
Table of Contents
