Adjustments Of The Bike - Vanraam Easy Go User Manual

Damaged or worn out parts
The replacement and repair of parts (frame, forks, light, brakes, drive mechanism and the
handlebars) should always be performed by an authorised dealer. If not, the guarantee
ceases to be valid and you will be personally responsible in the event of possible damage.
Specific safety parts should always be replaced by new parts!

Adjustments of the bike

Before using the scooter bike, adjust it to the measurements of the driver. This is of great
importance, especially the seat and the handlebars.
If an optimal adjustment of the scooter bike, as defined in the instructions, is not
possible, you can contact your dealer for a fitting solution.
The brakes are correctly adjusted and should only be adjusted by the dealer during periodic
maintenance.
Take care that fingers and limbs do not get trapped while adjusting the scooter
bike.
Seat
When the cyclist is sitting on the scooter bike and can
put a foot on the pedal in the lowest position, the seat
height is correct. Adjust the seat height in such a way
that the leg is stretched but relaxed in that position.
Version 21.01
8/43