Vanraam Easy Go User Manual page 10

Handlebars height
The height of the handlebars affects the comfort
of the ride. It determines the pressure on the
hands and the position of the back. You decide
the most comfortable position yourself with
some practice.
To adjust the handlebars:
1. Slightly loosen the screw by using an
Allen key.
2. Move the handlebars to the correct
height and tighten the screw very
firmly again.
Do not pull out the handlebars further than the mark. Otherwise
the tube will not be deep enough in the shaft and will risk coming
off, which can lead to serious injuries.
Position handlebars
You can tilt the handlebars. This influences the
distance from the handlebars to the upper body.
Determine your own most comfortable position
by using the bike.
To tilt the handlebars:
1. Slightly loosen the screws [A] and [B] with
an Allen key.
2. Put the handlebars in the desired position
and then tighten the screws considerably.
3. Slightly loosen screw [C] with an Allen key,
put the handlebars in the correct (horizontal)
position and then tighten the screw again.
Version 21.01
2.
1.
3.
[A]
1.
MIN INSERT
2.
[C]
[B]
10/43