Vanraam Easy Go User Manual page 20

Reverse mode
The reverse mode is activated by pedalling backwards from a standing position. Within a
few seconds the motor is activated and the scooter bike cycles at a speed of about 2 km/h
backwards (when you start to pedal backwards).
Do not be startled by an unexpected reaction from the electrical system. If you
e.g. wait for the traffic light and you play with the pedals by moving them
backwards the reverse mode is activated and the scooter bike cycles backwards.
Full electric drive
In the scooter mode, the electric motor operates
with a thumb throttle. Using the support levels
1, 2 and 3, you can attain higher or lower speed.
With the forward / reverse switch you can
control direction.
O = forward
- = reverse
There is no option to change the maximum speed in the reverse mode. The LED lights of
the support levels 1,2 and 3 burn to indicate that the reverse mode is activated.
Do not use support level 2 and 3 on the sidewalk or in a pedestrian area.
Version 21.01
20/43