Table of Contents
Advertisement
1. On/off button
Using the on/off button, the electrical system can be
switched on or off.
Switching on: Push the button briefly.
•
Switching off: Push the button for
•
two seconds.
After the system is turned on, the electric motor is active in level 1.
When the system is not used, it will automatically turn off after a certain time.
Always turn off the electric system before getting on and off the bike, and when
you are walking while holding the bike.
2. Degree of support 1, 2 and 3
The desired support can be set by using one of the support levels 1, 2 or 3.
1.
Light support, maximum range.
2.
Average support, average range.
3.
Maximum support, low range.
You can change the level while cycling.
The behaviour of the battery depends on a lot of different factors and is strongly
influenced by: capacity and voltage of the battery, degree of support that is used,
temperature, wind speed, tyre pressure, cycling speed, weight of the user and the
luggage, use of gearing etcetera.
3. Start assist
The start assist is not available with the Easy Go scooter bike.
Version 21.01
18/43
Advertisement
Table of Contents
