Table of Contents
Advertisement
Walking-stick holder
De stokhouder is bevestigd onder de zitting. De
stok(ken) dienen te worden vastgezet met het
klittenband [A].
Flashing light system
The scooter bike is optionally fitted with four
flashing lights. (two in front and two in the
rear)
To operate the flashing lights you press the
switch [A] to the left or right.
When you want to turn off the flashing light
installation, you should keep the switch in the
middle.
The flashing lights work on batteries.
The batteries are present only in the front lights,
the rear lights are connected to them.
To replace the batteries, loosen the screw of the
cap and take the orange cap [B] away. Then
remove the PCB [C] from the holder. You can
now replace the battery [D].
This is a 3 volt lithium battery of the type
CR123A.
Batteries cause environmental pollution.
Follow the local regulations during disposal.
Version 21.01
[C]
[D]
[A]
[A]
[B]
30/43
Advertisement
Table of Contents
