Vanraam Easy Go User Manual page 36

3. Tighten the nuts of the hub slightly.
4. Check if the chain tension is correct.
5. Tighten the nuts firmly.
Adjusting the chain tension of engine chain
In order to maintain the correct chain tension of
the engine, the engine is adjusted. To do this,
follow the instructions given below:
1. Loosen the socket screws of the engine
bracket with an Allen key a few times, so
that the engine can move back and forth.
2. Tighten the nuts on the two chain tensioners
so that the engine slides forward and the
chain is tightened. (Remember to tighten
both the nuts equally.)
3. Tighten the socket screws of the engine
bracket slightly.
4. Check if the chain tension is correct.
5. Tighten the nuts firmly.
Adjusting the suspension
The suspension is set at the factory. There are four
positions possible. The suspension can be set as
lighter or heavier by assembling the socket screws
in different positions.
Caution: This handling should always be
done by a dealer.
Version 21.01
2.
36/43
1.