Adjustments To Be Done By Dealer - Vanraam Easy Go User Manual

Adjustments to be done by dealer

The correct tension of the chain
Several chains are present on the scooter bike. The chains should not be too tight. Without
efforts you should be able to move the chain up and down, about half a centimetre.
Adjusting the chain tension of the foremost
chain
To keep the foremost chain of the scooter bike tight,
secure the chain tension wheel. To do this, follow the
instructions given below:
1. Loosen the cap nut a few turns with a
socket spanner.
2. Move the chain tension wheel, so that
the chain is under light tension, as
described above.
3. Tighten the cap nut again.
Adjusting the chain tension of the hub chain
In order to tighten the hub chain, the hub is
adjusted. To do this, follow the instructions given
below:
1. Loosen the nuts of the hub with a socket
spanner a few turns, so that the hub can
move back and forth.
2. Tighten the nuts on the two chain
tensioners, so that the hub slides back and
the chain is tightened. Tighten the chain till
the tension described above is reached.
(Remember to tighten both the nuts equally.)
Version 21.01
2.
1.
35/43