Related Manuals for Vanraam Funtrain
Summary of Contents for Vanraam Funtrain
- Page 1 User Manual Fun2Go and Funtrain Fun2Go Funtrain Combination Fun2Go with Funtrain Version 18.06 Van Raam | Aaltenseweg 56 | 7051 CM Varsseveld | The Netherlands...
-
Page 2: Table Of Contents
Frame number ............................... 39 Form service, maintenance, modifications and warranty claims ..........40 Contact details manufacturer Van Raam Aaltenseweg 56 7051 CM Varsseveld The Netherlands Tel. : +31 (0)315 257370 E-mail : info@vanraam.com Internet : www.vanraam.com User manual | Fun2Go and Funtrain 18.06... -
Page 3: Conformity
“Form service, maintenance, modifications an warranty claims” in the back of this manual. Indication The Fun2Go and Funtrain are meant to ride together with people who are no longer able to independently participate in traffic. One attendant rides with several people with disabilities. -
Page 4: Intended Usage
Also the local traffic rules should always be complied with. The tricycle is meant for two persons, coupled to the Funtrain it is meant for four persons. The driver should be independently mobile and may not have any serious visual or other impairment, which could adversely affect the controlling of the tricycle. - Page 5 If not, the guarantee ceases to be valid and you will be personally responsible in the event of possible damage. Specific safety parts should always be replaced by new parts! User manual | Fun2Go and Funtrain 18.06...
-
Page 6: Adjustment Of The Tricycle
To adjust the seat: 1. Pull the handle up. 2. Move the seat to the correct position and release the handle. User manual | Fun2Go and Funtrain 18.06... - Page 7 2. Put the handlebars in the desired position and then tighten the screws considerably. 3. Slightly loosen screw [C] with an Allen key, put the handlebars in the correct (horizontal) position and then tighten the screw again. User manual | Fun2Go and Funtrain 18.06...
-
Page 8: Before The First Use
In the “Auto” position, the headlight turns on or off automatically with the help of light- and movement sensors. When the tricycle stands still for a while, the light will automatically turn off. User manual | Fun2Go and Funtrain 18.06... - Page 9 1. Remove the two screws at the back of the front light. 2. Dismantle the rear cover by pressing with the thumb and index finger at the cavity on both sides of the front cover and pulling the rear cover back. User manual | Fun2Go and Funtrain 18.06...
- Page 10 The rear light works on batteries. When the batteries are almost empty, a red LED light on the top starts flashing. To replace the batteries, follow the next steps. User manual | Fun2Go and Funtrain 18.06...
- Page 11 Ensure the support wheel is folded after connecting. Unlock the locking bolt by pulling it out. Move the support wheel to the folded position until you hear a ‘click’ when the locking bolt locks itself again. User manual | Fun2Go and Funtrain 18.06...
- Page 12 Gears Standard the tricycle has eight gears. The gears are used by turning the grip. Do not use the pedals when turning the grip. User manual | Fun2Go and Funtrain 18.06...
- Page 13 For example, at traffic lights the reverse function can accidentally be activated and the tricycle reverses. High speeds in the bends, driving on rough ground, and sharp bends can lead to the tricycle falling over! User manual | Fun2Go and Funtrain 18.06...
- Page 14 Small obstacles should be cycled over with appropriate speed. • Obstacles higher than five centimetres should be avoided. • Ensure that no dangerous speed develops while driving downhill and entering • tunnels. Brake on time. User manual | Fun2Go and Funtrain 18.06...
-
Page 15: Electro System Silent
1. On/off button two seconds. After the system is turned on, the electric motor is active in level 1. When the system is not used, it will automatically turn off after a certain time. User manual | Fun2Go and Funtrain 18.06... - Page 16 • Extra support for cycling uphill. • Tip: when cycling a steep climb, you can use support in level 3 and push the start assist repeatedly for five seconds to achieve maximum support. User manual | Fun2Go and Funtrain 18.06...
- Page 17 The five green lights indicate the level of charge in your battery, the left one of these, if flashing, given the lowest level. While charging the battery, these lights will also indicate how far the charging has progressed. User manual | Fun2Go and Funtrain 18.06...
- Page 18 Beware! If the battery is not connected properly, the green LED light blinks slowly. In case of a poor contact, the connector of the charger needs to be cleaned. User manual | Fun2Go and Funtrain 18.06...
- Page 19 If necessary, the battery can also be charged directly on the cycle. Do not wait until the battery is completely empty. It is better to top-up the battery regularly. Ensure that the battery is always pushed straight into the holder. User manual | Fun2Go and Funtrain 18.06...
- Page 20 A battery that is empty and not charged, will self-discharge and will be deep discharged. The battery can be permanently damaged during this process. In case of deep discharge, the warranty will be void. User manual | Fun2Go and Funtrain 18.06...
- Page 21 The battery can be reactivated by recharging it briefly, pushing and holding down the on/off button while cycling (less than 10km/h), or on certain batteries by pushing the indicator button on the battery until the indicator appears. User manual | Fun2Go and Funtrain 18.06...
- Page 22 This indicates motor failure. You will need to contact your dealer. If a red LED light on the charger starts flashing, remove the plug form the mains outlet • and do not longer use the charger. In this case, contact your dealer. User manual | Fun2Go and Funtrain 18.06...
-
Page 23: Van Raam E-Bike App
Now free download from the Google Play Store or Apple App store, the Van Raam e-Bike app. More information about the Van Raam application can be found on the Van Raam website: www.vanraam.com. User manual | Fun2Go and Funtrain 18.06... -
Page 24: Accessories
The co-driver has to cycle also. Before cycling, set the speed hub in the desired position. When you want to cycle in another position, first stop the bike. User manual | Fun2Go and Funtrain 18.06... - Page 25 1. Slightly loosen the four nuts with a socket wrench. 2. Slide the plate included the foot support forwards or backwards into the desired position. Then tighten the nuts again. User manual | Fun2Go and Funtrain 18.06...
- Page 26 The neutral position can be altered by shifting the balancing block. 1. Slightly loosen the two screws with a socket wrench. 2. Slide the balancing block to the desired position. Then tighten the screws again. User manual | Fun2Go and Funtrain 18.06...
- Page 27 [A]. The lower leg support is attached to the inner side of the foot support. The image at the top shows Fix 20 with lower leg support, the image below shows Fix 25 with lower leg support. User manual | Fun2Go and Funtrain 18.06...
- Page 28 4. Fix the elastic on the frame, so the lower leg support stays upright in its rest position. 5. Use the velcro to sucure the lower leg of the rider. User manual | Fun2Go and Funtrain 18.06...
- Page 29 Flashing light system To use the flashing lights press the switch [A] to the left or right. If you want to switch off the flashing light system, put the switch in the middle position. User manual | Fun2Go and Funtrain 18.06...
- Page 30 1. Pull the handle on the side of the chair backwards and turn the seat. The seat locks automatically. 2. Pull the handle on the side of the chair backwards and turn the seat to its normal position. The seat locks automatically. User manual | Fun2Go and Funtrain 18.06...
- Page 31 Take care that fingers and limbs do not get caught in between while folding the armrest! Swivelling footrest The footrest can be folded away under the seat. Ensure that the footrest falls into place and locks firmly! User manual | Fun2Go and Funtrain 18.06...
- Page 32 2. Move the seat to the required position and release the handle. To adjust the seat on the adapter: 1. Slightly loosen the grip handle. 2. Bring the seat in the required position. 3. Tighten the grip handle again. User manual | Fun2Go and Funtrain 18.06...
- Page 33 Firmness backrest comfort seat To adjust the backrest to a looser or tighter position: 1. Open the straps by loosening the Velcro. 2. Tighten the straps or loosen them. 3. Fasten the Velcro again. User manual | Fun2Go and Funtrain 18.06...
- Page 34 Loosen the screws with an Allen key to remove the rack. When loosened, the rods can be pulled out of the bike frame. Transporting a walking frame is also possible. Please ask your dealer about the possibilities. User manual | Fun2Go and Funtrain 18.06...
-
Page 35: Technical Details
Do not use a pressure washer or a steam cleaner! Cleaning the upholstery of the seat The upholstery and the back rest of the seat are removable and can be cleaned. You can wash them in the washing machine at 40°C maximum. User manual | Fun2Go and Funtrain 18.06... - Page 36 Only use original Van Raam spare parts, which you can buy at you dealer. If requested the dealer will make the necessary information on repair and maintenance available. User manual | Fun2Go and Funtrain 18.06...
-
Page 37: Repairs And Maintenance To Be Done By Dealer
In that case the rim should be replaced, because it can lead to loss of brake function or even a crack in the rim, which can lead to all kinds of dangerous consequences. Repairs, maintenance and modifications should only be performed with original Van Raam parts. User manual | Fun2Go and Funtrain 18.06... -
Page 38: Adjustments To Be Done By Dealer
2. Shift the tensioning wheel in such a way that the chain hangs loose, as described above. 3. Tighten the screw again. User manual | Fun2Go and Funtrain 18.06... -
Page 39: Disposal
Van Raam. The original CE certification will become nul-and-void if modifications are done by third parties. The absence of the certification can lead to problems in insuring your bike, and for any loss or incurred. User manual | Fun2Go and Funtrain 18.06... -
Page 40: Frame Number
Frame number The frame number is printed on the sticker. This sticker is located on the frame, see the image below. Example sticker: Position of sticker: On the side of the seat tube User manual | Fun2Go and Funtrain 18.06... -
Page 41: Form Service, Maintenance, Modifications And Warranty Claims
The following items are changed to the bike: Changed: Date: Carried out: Beware! Please note that if changes are made by a non-authorized Van Raam dealer or no original Van Raam parts or options are used, warranty may void. User manual | Fun2Go and Funtrain 18.06... - Page 42 Here you have space to take notes or write down the maintenance on your bike: User manual | Fun2Go and Funtrain 18.06...
- Page 43 Here you have space to take notes or write down the maintenance on your bike: User manual | Fun2Go and Funtrain 18.06...
- Page 44 Here you have space to take notes or write down the maintenance on your bike: User manual | Fun2Go and Funtrain 18.06...
- Page 45 Fill out when the tricycle is delivered Type Van Raam tricycle: Frame number: Key number: Delivered to: By dealer: Place: Date: Signature user bike: Signature dealer: When available, stamp dealer: User manual | Fun2Go and Funtrain 18.06...