Vanraam Easy Go User Manual page 33

The wheels can be cleaned with a moist brush with plastic hairs (not a wire brush!). The
seat, the grips and the backrest can be cleaned with mild soap and water.
Do not use a pressure washer or a steam cleaner!
The right lubricant
The chain should be cleaned and maintained at regular intervals (every three months
approximately). Only use special chain grease or Tevlon spray. This is the only way to make
sure that the chain will run smoothly, will stay water resistant and will not rust.
1. Wipe the chain with a cloth.
2. Treat it with grease or spray.
3. Remove any excess lubricant with a rag.
Other parts should not be treated with a lubricant.
Inspection of the scooter bike
It is recommended that the scooter bike has a yearly inspection carried out by the dealer to
claim warranty. Please use the form "Form service, maintenance, modifications and
warranty claims" in the back of this manual. After 200 kilometres or after a period of two
months the scooter bike should be inspected.
In the event of technical trouble or faults, the scooter bike should be taken to the dealer
for repairs immediately.
The replacing of safety-related components (especially frame, brakes, lighting, handlebars,
front fork and actuation) should be performed by the dealer.
If you still decide you want to replace components yourself, you are responsible for
damage or harm due to incorrectly fitted components.
Version 21.01
33/43