Adjustments To Be Done By Dealer - Vanraam Fun2Go User Manual

Adjustments to be done by dealer

The correct tension of the chain
There are three chains on the tricycle. The chain
should not be too tight. It should hang loose.
Without effort you should be able to move the
chain up and down, half a centimetre
approximately.
To keep the tension of the central chain correct, a
special tensioning wheel is fitted by the back axis of
the tricycle, as an integrated chain tensioner. To adjust
the tension of the chain:
1. Slightly loosen the screw. Hold the nut at
the back tight with a socket wrench to stop
the screw from slipping.
2. Shift the tensioning wheel in such a way
that the chain hangs loose, as described
above.
3. Tighten the screw again.
To keep the tension of the two chains at the front
correct, you can adjust the special tension
wheels by the pedal axes. To do
1. Slightly loosen the screw. Hold the nut
at the back tight with a socket wrench
to stop the screw from slipping.
2. Shift the tensioning wheel in such a way
that the chain hangs loose, as described
above.
3. Tighten the screw again.
Version 21.01
this:
37/43