Device Description; Overview; Bq769142 Device Versions - Texas Instruments BQ769142 Manual

High accuracy battery monitor and protector for liion, li-polymer, and lifepo4 battery packs
Table of Contents

Advertisement

www.ti.com

8 Device Description

8.1 Overview

The BQ769142 device is a highly integrated, accurate battery monitor and protector for 3-series to 14-series Li-
ion, Li-polymer, and LiFePO
accuracy provides data for host-based algorithms and control. A feature-rich and highly configurable protection
subsystem provides a wide set of protections that can be triggered and recovered completely autonomously by
the device or under full control of a host processor. The integrated charge pump with high-side protection NFET
drivers enables host communication with the device even when FETs are off by preserving the ground
connection to the pack. Dual-programmable LDOs are included for external system use, with each independently
programmable to voltages of 1.8 V, 2.5 V, 3.0 V, 3.3 V, and 5.0 V, capable of providing up to 45 mA each.
The BQ769142 device includes one-time-programmable (OTP) memory for customers to setup device operation
on their own production line. Multiple communications interfaces are supported, including 400-kHz I
HDQ one-wire standards. Multiple digital control and status data are available through several multifunction pins
on the device, including an interrupt to the host processor, and independent controls for host override of each
high-side protection NFET. Three dedicated pins are provided for temperature measurement using external
thermistors, and multifunction pins can be programmed to use for additional thermistors, supporting a total of up
to nine thermistors, in addition to an internal die temperature measurement.

8.2 BQ769142 Device Versions

The BQ769142 device family may include versions with differing default settings programmed during factory test.
These different settings, which may include having a different default communications interface or a different
setting for the REG1 LDO, will be described in the
Copyright © 2021 Texas Instruments Incorporated
battery packs. A high accuracy voltage, current, and temperature measurement
4
Device Comparison
Product Folder Links:
SLUSE91A – SEPTEMBER 2020 – REVISED FEBRUARY 2021
Table.
BQ769142
BQ769142
2
C, SPI, and
Submit Document Feedback
31

Advertisement

Table of Contents
loading

Table of Contents