Assembly - CARDIOSTRONG TX90 Assembly And Operating Instructions Manual

2.3

Assembly

Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
NOTICE
L
First loosely screw all parts together and check that they fit properly. Then tighten the screws
using the tool only when you are instructed to do so.
Step 1: Assembly of the console masts
Connect the two cables (115 and 116) with one another.
1.
࣑ ATTENTION
Be careful not to pinch the cables in the following step.
2. Fix the right and left handlebar post (2 and 3) to the main frame (1) with eight allen bolts (7),
eight spring washers (8) and eight flat washers (9).
2
9
8
7
Step1
115
3
7
x8
M8x1.25x20L
8
x8
D15.4xD8.2x2T
9
x8
D25xD8.5x2T
115
116
1
13