Storage; Transportation; Disposal Requirements; Specification - Polaris PVCR 3200 IQ Home Aqua Black Operation Manual

The device does not
respond to pressing
buttons on the device
panel

STORAGE

Electric devices shall be stored in a dry and clean room at an ambient temperature of up to 40ºC under relative
humidity of 70% provided the absence of any ambient dust, acidic or other fumes which can adversely influence
on electric device materials.
Keep the device out of the reach of children.

TRANSPORTATION

Electric devices can be transported by means of any kind of transport as per cargo carriage rules applicable to an
involved kind of transport. The device shall be transported in its original package.
The device transportation method shall exclude potential ingress of atmospheric precipitations and aggressive
agents.
Attention! Upon the device lifespan expiration, do not discard it together with household wastes. Return it to a
special collection point for recycling. Thus you contributes to environment protection
SALE
No prescribed sale rules.

DISPOSAL REQUIREMENTS

As per WEEE 2012/19/EU on waste electrical and electronic equipment Directive, appliances shall be
disposed separately from household wastes. A decommissioned appliance shall be sent to an official
center for separate collection of wastes.

SPECIFICATION

PVCR 3200 IQ Home Aqua - an electric robotic household vacuum cleaner by POLARIS TM
The device diameter: 310 mm
The device height: 76 mm
The dust bag capacity: 500 ml
The device power: 40 W
The power source: electric battery
Accumulator charging time: up to 5 hours
The time of powering from the accumulator: up to 150 minutes
The charger
The charger characteristics:
Input voltage: 100-240 V, 0.5 A
Frequency: 50/60 Hz
Output voltage: 19 V
The maximum loading current: 600 mA
Protection category- 2
Power supply elements for RCU - AAA type, 2 pcs.
Note: Due to the constant process of making changes and improvements, there may be some differences between
the Operation Manual and the product. The manufacturer hopes that the user will pay attention to it.
3. The device was
successfully
connected, but
unexpectedly stopped
responding to
commands from the
application.
The function of
protection against
accidental pressing is
activated
Li-on 3200 mAh 14.8 V
91
Go to the device page and click on the
asterisk in the upper right corner. Next, in the
Connection Diagnostics section, read the
diagnostic diagram. Click on the exclamation
mark next to the red section of the network
and follow the instructions of the online
assistant.
Have not found a solution for your problem?
See additional information or contact support
service in the section "Smart Home" on our
website.
Disable protection in the app or from the
device panel