Table of Contents
Advertisement
SH AUTO
3 Installation
3.1 Temperature conditions
3.2 Condition of distance
3.3 Foundation / levelling
6
The machine has been con-
structed for outdoor placement.
The min. ambient temperature
for the machine is –20°C and
the maximum ambient tempera-
ture is 40°C.
In consideration of the cooling
system of the machine and the
accessibility of service, there
must be free wall space on both
sides of the machine. To the
Place the machine on a plane fl oor.
Bolt the machine to the foundation through the 3 holes (Ø12 mm)
in the bottom plate. Before fastening, the machine must be levelled.
Shape of foundation, see illustration at the end of this manual.
The hose, gun and lance are
frost protected to -20°C provi-
ded by circulation of preheated
water through the system. The
lance must be placed in the
lance holder (14 ) after use in
order to circulate the water in
periods with frosty weather.
The machine features a fan
heater automatically starting up
when the temperature inside
the machine gets too low.
The adjustment of the thermal
sensor is effected in the electric
box. On delivery the adjustment
has been set at 5°C. This set-
ting must not be lowered.
right 200 mm at a minimum, to
the left 500 mm at a minimum
and behind 300 mm.
The distance from the chimney
outlet to infl ammable material
must be 1,000 mm. This dis-
tance can be reduced to 300
mm by mounting a diverter. You
will fi nd diverter and instruc-
tions for mounting in the front
door.
The chimney (1) can be turned
180° by dismounting 4 pcs. M6
screws (under the top plate),
turning the chimney and re-
mounting the screws.
Original Instructions
Advertisement
Table of Contents
