Detergents A And B; Running The Sh Auto; Starting Up - Nilfisk-Advance SH AUTO Series Instructions For Use Manual

SH AUTO

4.1.8 Detergents A and B

Nilfi sk's suggestions for detergent addition per program step:
4 Programs, water hardness > 20° dH
Program
1
2
3
4
5
5 Programs, water hardness < 10° dH or water softener installed
Program
1
2
3
4
5

4.2 Running the SH AUTO

4.2.1 Starting up

18
Description
High pressure cleaning
Foam brush
Clear rinses
Gloss rinses
Gloss rinses
Description
High pressure cleaning
Foam brush
Clear rinses
Gloss rinses
Gloss rinses
Prior to setting the SH AUTO into operation the entire machine
should be properly vented, (section 3.7), and the settings of the
paying system should be carried out (section 4.1.1 to 4.1.4).
1.Turn the main switch on the front of the electric box to position
2. Observe that the display next to the coin input is illuminated and
Flow rate Temp. Detergent
100% Hot A (Super Plus / Auto Active)
50% Hot A (Super Plus / Auto Active)
100% Cold
50% Cold B (Auto Dry)
100% Cold
Flow rate Temp. Detergent
100% Hot A (Super Plus / Auto Active)
50% Hot A (Super Plus / Auto Active)
100% Cold
50% C or H B (Active Wax)
100% Cold
+ +
"ON".
shows "01:00" (if minimum value is set to 1).
The concentration of detergent
can be adjusted on the indi-
vidual detergent pumps. The
concentration of detergent in
the water jet can be adjusted
from 0 - 0.8 %.
Original Instructions
Water
Hard
Hard
Hard
Hard
Hard
Water
Soft
Soft
Soft
Soft
Soft