Stopping The Sh Auto - Nilfisk-Advance SH AUTO Series Instructions For Use Manual

4.2.2 Stopping the SH AUTO

Original Instructions
3. Close the door of the SH AUTO, and lock the two key-locks.
4. Position the program selector switch (3) in position "STOP".
5. The SH AUTO is now operative.
By inserting valid coins or coins through the coin inlet, the display
will show the payment, summing up as more coins are inserted.
!! NOTE: The machine will start when the preset "minimum
payment" has been reached. Insert of more coins will increase the
time.
!! NOTE: In case of emergency turn the program selec-
tor switch (3) to STOP, or push the optional "Emergency
Switch" !!
When pay time runs out (display at 00:00) the SH AUTO will auto-
matically stop and relieve pressure from the hose/spray handle, no
matter where the program selector switch is positioned.
If working is terminated for more than 90 seconds during pay-time
(closed handle), the SH AUTO will enter standby mode, and the HP
pump will stop. The boost button will start fl ashing. Working can be
resumed by pressing the boost button, as long as pay time has not
expired.
!! NOTE: Do not disconnect the SH AUTO from main
power supply, neither by turning SH AUTOs main switch
to position "OFF", nor by interrupting external installation
switches as this will leave the SH AUTOs automatic frost
protection device inoperative.
SH AUTO
19