Nilfisk-Advance E 140.2 User Manual

Nilfisk-Advance E 140.2 User Manual

Nilfisk-advance america pressure washer user manual
Hide thumbs Also See for E 140.2:

Advertisement

Nilfi sk E 130.2
Nilfi sk E 140.2
Nilfi sk E 145.2
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the E 140.2 and is the answer not in the manual?

Questions and answers

Peter
June 14, 2025

Try to open the cover of my e140.2 after I take out the 2 Torx screw in the foot stand still cannot open the cover, is their any additional screw to pull out

Summary of Contents for Nilfisk-Advance E 140.2

  • Page 1 Nilfi sk E 130.2 Nilfi sk E 140.2 Nilfi sk E 145.2 User Manual...
  • Page 2 Copyright © 2011 Nilfisk, Division of Nilfisk-Advance A/S...
  • Page 3: Table Of Contents

    Index 1 Safety precautions and warnings ...3 2 Description ...4 3 Before you start using your pressure washer ...5 4 Operating your pressure washer ...6 5 Fields of Application and Working Methods ...10 6 After using your pressure washer ...12 7 Maintenance ...13...
  • Page 4: Description

    Cable connections should be kept dry and off the ground. Mains power connection The following should be ob- served when connecting the high pressure washer to the electric installation: Only connect the machine to an installation with earth con- nection.
  • Page 5: Before You Start Using Your Pressure Washer

    2.2 Operation elements and model survey 3 Before you start using your pressure washer 3.1 Mounting of trolley handle and hose hook (standard models) 3.2 Mounting of hose reel handle (models with hose reel) See illustration at the end of this manual.
  • Page 6: Operating Your Pressure Washer

    3.3 Mounting of quick coupling 3.4 Mounting of high pressure hose 4 Operating your pressure washer 4.1 Connection of high pressure hose (models without hose reel) 1. Screw the quick coupling (16) tight on to the water inlet (2). Note: The inlet fi lter must al- ways be fi...
  • Page 7 4.2 Mounting of spray lance and Click & Clean nozzles Water connection 1. Push the spray lance (6) into the spray gun (7) and screw it on. Note: The spray lance (6) has a built-in low pressure nozzle that can be used for fl...
  • Page 8 4.4 Telescopic handle 4.5 Start and stop of the ma- chine (when connected to a water supply) 4.6 Start the machine (when connected to open con- tainers (suction mode)) The spray lance is affected by a thrust during opera- tion - therefore always hold it fi...
  • Page 9 4.7 Pressure regulation on ® the TORNADO nozzle 4.8 Stationary use The pressure can be regulated on the TORNADO High pressure Low pressure If mounting a special wall hook (not standard), the pressure washer can be used as a sta- tionary solution meaning that it can be operated while hanging on the wall.
  • Page 10: Fields Of Application And Working Methods

    Accessories and detergents, when correctly cho- sen, can increase the effi ciency of your pressure washer. Here is some basic information about cleaning. Foam or detergent should be applied onto dry surfaces so that the chemical product is in direct contact with the dirt.
  • Page 11 5.2 Typical fi elds of application Below you will fi nd a description of a lot of cleaning tasks which can be solved by a pressure washer from Nilfi sk in association with accessories and detergents. Task Accessories ‘Click & Clean’...
  • Page 12: After Using Your Pressure Washer

    6 After using your pressure washer 6.1 Storing the washer 6.2 Winding up of electric cable and high pressure hose 6.3 Storage of accessories a + f The machine should be sto- red in a frost-free room! Pump, hose and accessories...
  • Page 13: Maintenance

    7 Maintenance 7.1 Cleaning of water inlet fi lter 7.2 Cleaning of nozzle 7.3 Cleaning of machine vents 7.4 Greasing of couplings WARNING! Always disconnect the electrical plug from the socket prior to maintenance or cleaning. To ensure a long and problem free working life, please take the following advice: Wash out water hose, high...
  • Page 14: Trouble Shooting

    8 Trouble-shooting To avoid unnecessary disappointments, you should check the following before contacting the Nilfi sk service organization: Symptom Cause Machine refuses to start Machine not plugged in Defective socket Fuse has blown Defective extension cable Fluctuating pressure Pump sucking air Valves dirty, worn out or stuck Pump seals worn out...
  • Page 15: Further Information

    9 Further information 9.1 Recycling the washer 9.2 Warranty conditions Make the old cleaner unusable immediately. 1. Unplug the cleaner and cut the electric cable. Do not discard electrical appli- ances with household waste. Nilfi sk guarantees high pres- sure washers for domestic use for 2 years.
  • Page 16 Rotating brush for cleaning of wooden surfaces. Rotating brush for cleaning of wheel rims. For suspension of your high pressure washer on the wall. For cleaning vehicles and other surfaces. For removal of large amounts of water from e.g. garden...
  • Page 17: Eu Declaration Of Conformity

    For cleaning of grease and oil on motors for instance. Applied with an atomizer. For cleaning of wooden surfaces incl. of wooden garden furniture. High Pressure Washer Nilfi sk E 130.2, E 140.2, E 145.2 230 V 1~, 50 Hz - IP X5 EC Machine Directive EC Low-voltage Directive...
  • Page 19 www.nilfi sk.com...

This manual is also suitable for:

E 145.2E 130.2

Table of Contents

Save PDF