Programs Management - ATEQ F670 Quick Start Manual

3. PROGRAMS MANAGEMENT

3.1. L
EAK PROGRAM CREATION
From the main
"PARAMETERS" menu by using the "Up"
and "Down" keys and then validate with
"OK".
Select the test program number to create
(or modify).
------------ for an empty program.
Then Select the test type: LEAK.
The parameters menu is displayed, access
to each parameter by using the "Up" or
"Down" keys and validate with "OK" to edit
the parameter.
Then by using the "Up" or "Down" keys
and adjust the parameter to the desired
value and validate with "OK".
Do the same process for all the others parameters.
MR-36300C-U
menu, select the
PARAMETERS
► Copy-Paste
Pr:01 -----------------
Pr:02 -----------------
Pr:03 -----------------
Pr:04 -----------------
Pr:05 -----------------
Pr:06 -----------------
Pr:07 -----------------
PARAM / TYPE
► LEAK TEST
BLOCKAGE
DESENSITIZED TEST
OPERATOR
PARAM / Pr001
► TYPE : LEAK TEST
COUPL A : 0.0 s
FILL TIME : 0.0 s
STAB TIME : 0.0 s
TEST TIME : Inf. s
DUMP TIME : 0.0 s
Press. UNIT: bar
Max FILL : 0.000
PARAM / Pr001
TYPE : LEAK TEST
COUPL A : 0.0 s
FILL TIME : 0.0 s
STAB TIME : 0.0 s
TEST TIME : 2.0 s
DUMP TIME : 0.0 s
Press. UNIT: bar
Max FILL : 0.000
Quick start manual ATEQ F670 Page 15/25
Quick start - F670
◄