RGBlink X7 User Manual page 75

Hide thumbs Also See for X7:
Table of Contents

Advertisement

resolutions, higher refresh rates, and greater color depth, maximum resolution 3840 × 2160@60Hz
● DP 1.4: publish on 1 Mar, 2016.overall transmission bandwidth 32.4 Gbit/s ,DisplayPort 1.4 adds
support for Display Stream Compression 1.2 (DSC), DSC is a "visually lossless" encoding technique with
up to a 3:1 compression ratio. Using DSC with HBR3 transmission rates, DisplayPort 1.4 can support 8K
UHD (7680 × 4320) at 60 Hz or 4K UHD (3840 × 2160) at 120 Hz with 30 bit/px RGB color and HDR. 4K
at 60 Hz 30 bit/px RGB/HDR can be achieved without the need for DSC.
●Multi-mode Fiber: Fibers that support many propagation paths or transverse modes are
called multi-mode fibers, generally have a wider core diameter and are used for short-distance
communication links and for applications where high power must be transmitted.
●Single-mode Fiber: Fiber that support a single mode are called single-mode fibers. Single-mode
fibers are used for most communication links longer than 1,000 meters (3,300 ft).
●SFP:small form-factor pluggable , is a compact, hot-pluggable network interface module used for
both telecommunication and data communications applications.
●optical fiber
connector:
terminates the end of an optical fiber, and enables quicker connection and
disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light
can pass. 4 most common types of optical fiber connectors are SC, FC, LC,ST.
●SC:(Subscriber Connector), also known as the square connector was also created by the Japanese
company – Nippon Telegraph and Telephone. SC is a push-pull coupling type of connector and has a
2.5mm diameter. Nowadays, it is used mostly in single mode fiber optic patch cords, analog, GBIC, and
CATV. SC is one of the most popular options, as its simplicity in design comes along with great
durability and affordable prices.
● LC:(Lucent Connector) is a small factor connector (uses only a 1.25mm ferrule diameter) that has a
snap coupling mechanism. Because of its small dimensions, it is the perfect fit for high-density
connections, XFP, SFP, and SFP+ transceivers.
● FC :(Ferrule Connector) is a screw type connector with a 2.5mm ferrule. FC is a round shaped
threaded fiber optic connector,mostly used on Datacom, telecom, measurement equipment,
single-mode laser.
● ST: (Straight Tip) was invented by AT&T and uses a bayonet mount along with a long spring-loaded
ferrule to support the fiber.
● USB: Universal Serial Bus is a standard that was developed in the mid-1990s that defines cables,
connectors and communication protocols. This technology is designed to allow a connection,
X7
User Manual
74

Advertisement

Table of Contents
loading

Table of Contents