RGBlink X7 User Manual page 53

Display Are 1 of Bank 4 is switched to PGM but Display Area 2 keep the same as Bank 1.
Keep|Swap
Only when separate Display switching is OFF can Keep|Swap work.
Under the Keep status, users need to select a bank and use Cut or Take to switch image from PST
to PGM.
Under Swap status, users select a bank, then use Take or Cut to swap this bank and the bank
before this one.
Bank Save and Load
Save Bank to Page
Select a bank,click Page,select Page X,the bank is saved in the page.
The page turns green then become green, indicating the bank is saved in the page.
Load bank from Page
Click Load Page, pages with bank saved are green, select one from them and the selected one
becomes red. The bank is loaded from page to PST.
X7 User Manual
52