Table of Contents
Advertisement
Input Setting
Click any input port in purple area, the board where the port locates is selected. Users can do
settings to the board now. A red rectangle
Different input modules port could have different input setting items subject to their features but
generally on In end, there are such input settings items as: Property Setting, DSK Setting, EDID
Setting, Logo Setting, Source Merge. Some special modules such as H.264, 12G SDI, 4K@60
digitial modules could have H.264 setting, 12G SDI setting, 4K setting.
Here are figure listing the modules and its. output setting items supported.
DVI
HDMI
Property
√
√
DSK
√
√
Setting
EDID
√
√
Logo
√
√
Source
√
√
Merge
4KSetting
USB
Setting
H.264
Setting
Property Setting
Input Port：Current port
Scale
X/Y：Vertical and horizontal position
Width/Height：Vertical and horizontal size
Crop：
Left:crop left
Top:crop top
Width:horizontal size after crop
Height:vertical size after crop
Display mode：Live or Freeze
Picture Adjustment
Mirror：ON or OFF
Alpha：transparency adjustment, range from 0~128.
Mini Delay mode:On or Off. Select this mode on the
output and input pixel ratio is 1:1.Under this mode,
the image is under the best state.
Saturation：slide to adjust
X7
flashes around the chosen port when it is clicked.
4K@60HZ
12G
3G SDI
SDI
Mode
√
√
√
√
√
√
√
User Manual
USB
H.264
HDBaseT
Reserved
√
√
√
28
Advertisement
Table of Contents
