RGBlink X7 User Manual page 47

Click this icon to confirm the alias setting.
Layer
After signal is dragged into display, show Layer index Versus Signal index
Numbers on Monitor
Numbers on monitor is to show how many layers at present allowed to put in the monitor .
(each neighboring monitor (1 and 2, 3 and 4) allows to put 4 layers, if there is no neighboring
monitor in the display area, the single monitor can contain 4 layers. For example in one display
area, there are monitor 1 and monitor 3, monitor 1 can contain 4 layer and so does monitor 3)
X7 layer numbers
Layer Adjustment
there are two ways to adjust layer.
1. Use the bar under the interface
Choose one layer and the bar shows its signal source, type in position and size.
2. Layer Scale and Crop
X7 User Manual
46