Table of Contents
Advertisement
Slave Unit
Slave Unit is to control multiple devices simultaneously, which are connected to same network.
("In the same network" means the the the third section in the IP address digits are the same )
XPOSE do operation on one device, same operation synchronized to other devices. For example,
there is another devices linked to the same network, one with IP IP192.168.0.45
If users need to back up operation from current running device to this device slave unit shall be
used. First fill in the quantity of to be linked devices, click Set Numbers,
Index, Device IP and State will come up.
Choose the IP address of the other device from drop down list, e.g IP192.168.0.45 and
Slide to ON, the red dot behind turns to green indicating that the device has been connected
X7
User Manual
59
Advertisement
Table of Contents
