Avaya AP-4 User Manual page 79

10. Insert a plug into each hole. The AP comes with four 6 mm x 35
mm plugs; you only need to use three of these when wall mounting
the unit.
11. Insert a screw into each of the mounting holes molded into the
back cover. The AP comes with four 3.5 mm x 40 mm pan-head
screws; you only need to use three of these when wall mounting
the unit.
12. Insert the screws into the wall plugs. Use a screwdriver to tighten
the screws and attach the back cover to the wall. In the following
example, the back cover is mounted upside down (the two holes
are at the bottom).
Avaya Wireless AP-4/5/6 User's Guide
Additional Hardware Features
2-47