Avaya AP-4 User Manual page 110

You can configure and view the following parameters within the DHCP
Server Configuration screen:
Parameter
Enable DHCP
Server
Subnet Mask
Gateway IP
Address
Primary DNS IP
Address
Secondary DNS IP
Address
Number of IP Pool
Table Entries
Avaya Wireless AP-4/5/6 User's Guide
Description
Place a check mark in the box provided to
enable DHCP Server functionality.
NOTE:
You cannot enable the DHCP Server
functionality unless there is at least one
IP Pool Table Entry configured.
This field is read-only and reports the
Access Point's current subnet mask. DHCP
clients that receive dynamic addresses from
the AP will be assigned this same subnet
mask.
The AP will assign the specified address to its
DHCP clients.
The AP will assign the specified address to its
DHCP clients.
The AP will assign the specified address to its
DHCP clients.
This is a read-only field that reports the
number of IP address pools currently
configured.
Network
4-15