Reset - Avaya AP-4 User Manual

Reset

Reset
Use the Reset tab to restore the AP to factory default conditions. The AP
may also be reset from the RESET button located on the side of the unit.
Since this will reset the Access Point's current IP address, a new IP
address must be assigned. Refer to Recovery Procedures for more
information.
!
CAUTION:
Resetting the AP to its factory default configuration will permanently over-
write all changes that have made to the unit. The AP will reboot automati-
cally after this command has been issued.
Figure 6-6. Reset to Factory Defaults Command Screen
6-10 Avaya Wireless AP-4/5/6 User's Guide