Led Indicators - Avaya AP-4 User Manual

LED Indicators

The AP has four LED indicators. The LEDs are identified in LED
Indicators Illustrated and exhibit the following behavior:
Ethernet
Power Link
Solid Green Green when
link
exists
Solid Amber Solid Amber
Solid Green Solid Amber
Solid Red Off
Solid Red Green
Blinking Red Blinking Red
or Off
Blinking Red Off
Solid Red Blinking Red
or Off
Solid Red Off
Avaya Wireless AP-4/5/6 User's Guide
Ethernet Wireless
Activity Activity
Green flash Green flash
with data with data
activity activity
Solid Amber Solid Amber
Solid Amber Solid Amber
Off Off
Off Off
Blinking Red Off
Off Blinking Red
Solid Red Off
Off Solid Red
Additional Hardware Features
Indication
Normal Operation
Rebooting/Power on Self Test
(POST)
Reset to Factory Defaults command
issued
SDRAM Test Failure
If the AP is configured to get an IP
address from a DHCP server, it may
take up to two minutes to obtain the
address. The Power LED will be red
and if there is an Ethernet link the
Ethernet Link LED will be green
during the time the AP is trying to
obtain an address. Once an address
is obtained, the Power LED will turn
green.
Hardware Timer Test Failure
Flash Test Failure
Ethernet Test Failure
Wireless Test Failure
2-55