Ethernet - Avaya AP-4 User Manual

Avaya ap-4 access point: user guide

Hide thumbs Also See for AP-4:

Table of Contents

Ethernet

Select the desired speed and transmission mode from the drop-down

menu. Half-duplex means that only one side can transmit at a time and

full-duplex allows both sides to transmit. When set to auto-duplex, the AP

negotiates with its switch or hub to automatically select the highest

throughput option supported by both sides.

For best results, Avaya recommends that you configure the Ethernet

setting to match the speed and transmission mode of the device the

Access Point is connected to (such as a hub or switch). If in doubt, leave

this setting at its default, auto-speed-auto-duplex. Choose between:

• 10 Mbit/s - half duplex, full duplex, or auto duplex

• 100 Mbit/s - half duplex or full duplex

• auto speed - half duplex or auto duplex

Avaya Wireless AP-4/5/6 User's Guide