Enable 802.1X Security - Avaya AP-4 User Manual
Avaya ap-4 access point: user guide
Hide thumbs
Also See for AP-4:
- User manual (374 pages) ,
- User manual (502 pages) ,
- Configuration and deployment manual (3 pages)
Table of Contents
Advertisement
Security
Enable 802.1x Security
Follow these steps to enable 802.1x only:
1. Within the 802.1x Configuration screen, set 802.1x Security
Mode to 802.1x.
2. Select an Encryption Key Length.
— An 802.11b AP supports 64-bit and 128-bit encryption.
— An 802.11a or 802.11b/g AP supports 64-bit and 128-bit
encryption.
3. Enter a Re-keying Interval.
— The Re-keying Interval determines how often a client's
encryption key is changed and can be set to any value
between 60 - 65535 seconds. Rekeying frustrates hacking
attempts without taxing system resources. Setting a fairly
frequent rekey value (900 seconds=15 minutes) effectively
protects against intrusion without disrupting network activities.
4. Click OK to save the changes.
5. If you have not already done so, configure the RADIUS
authentication settings (see
for details.
6. Reboot the Access Point.
4-110
RADIUS Authentication with 802.1x
Avaya Wireless AP-4/5/6 User's Guide
Advertisement
Table of Contents
Troubleshooting
