What If Network Traffic Is Being Directed To A Nonexistent Host; I Have Just Configured The Management Id And Now I Can't Manage The Ap; Power Over Ethernet (Poe); The Ap Does Not Work - Avaya AP-4 User Manual

Symptoms and Solutions

What if network traffic is being directed to a nonexistent host?

• All sessions are disconnected, traffic is lost, and a manual override
is necessary
• Workaround: you can configure the switch to mimic the nonexistent
host
I have just configured the Management ID and now I can't manage
the AP?
• Check to ensure your password is correct. If your password is
incorrect or all inbound packets do NOT have the correct tag, then
a manual override is necessary.
!
CAUTION:
The manual override process disconnects all users and resets all values
to factory defaults.

Power over Ethernet (PoE)

The AP Does Not Work

1. Verify that you are using a standard UTP Category 5 cable.
2. Try a different port on the same PoE hub (remember to move the
input port accordingly) – if it works, there is probably a faulty port or
bad RJ-45 port connection.
3. If possible, try to connect the AP to a different PoE hub.
7-14 Avaya Wireless AP-4/5/6 User's Guide