Avaya AP-4 User Manual page 34

Prerequisites
Network Name
(SSID of the
wireless cards)
AP's IP Address
HTTP (Web)
Interface Password
CLI Interface
Password
SNMP Read
Password
SNMP Read-Write
Password
Security Settings
2-2
Assign the Access Point a Network Name
before wireless users can communicate with
it. The clients also need the same Network
Name. This is not the same as the System
Name, which applies only to the
Access Point. The network administrator
typically provides the Network Name.
If you do not have a DHCP server on your
network, then you need to assign the
Access Point an IP address that is valid on
your network.
Each Access Point requires a read/write
password to access the Web interface. The
default password is "public".
Each Access Point requires a read/write
password to access the CLI interface. The
default password is "public".
Each Access Point requires a password to
allow get requests from an SNMP manager.
The default password is "public".
Each Access Point requires a password to
allow get and set requests from an SNMP
manager. The default password is "public".
You need to determine what security
features you will enable on the Access Point.
Avaya Wireless AP-4/5/6 User's Guide