Enable Mixed Mode (802.1X And Wep Encryption) - Avaya AP-8 User Manual

3. Enter a Re-keying Interval.
— The Re-keying Interval determines how often a client's
encryption key is changed and can be set to any value
between 60 - 65535 seconds. Rekeying frustrates hacking
attempts without taxing system resources. Setting a fairly
frequent rekey value (900 seconds=15 minutes) effectively
protects against intrusion without disrupting network activities.

Enable Mixed Mode (802.1x and WEP Encryption)

Follow these steps to use both 802.1x and WEP Encryption
simultaneously (clients that do not support 802.1x use WEP Encryption
for security purposes):
1. Click Security Mode to Mixed.
2. Enter a Re-keying Interval.
— The Re-keying Interval determines how often a client's
encryption key is changed and can be set to any value
between 60 - 65535 seconds. Rekeying frustrates hacking
attempts without taxing system resources. Setting a fairly
frequent rekey value (900 seconds=15 minutes) effectively
protects against intrusion without disrupting network activities.
3. Click the Encryption tab.
4. Place a check mark in the box labeled Enable Encryption (WEP).
Avaya Wireless AP-8 User's Guide
SSID, VLAN, and Security Modes
4-135