Datamax M-Class Mark II Operator's Manual page 39

SET DEFAULTS *
GPI O PORT
GPI O DEVI CE
DI SABLED
APPLI CATOR
BARCODE
VERI FI ER
START OF PRI NT
LOW PULSE
HI GH PULSE
ACTI VE LOW
ACTI VE HI GH
EDGE
END OF PRI NT
LOW PULSE
HI GH PULSE
ACTI VE LOW
ACTI VE HI GH
SLEW ENABLE
STANDARD
LOW PULSE
HI GH PULSE
ACTI VE LOW
ACTI VE HI GH
Ch a pt e r 4 – M e n u Syst e m
Depending upon t he RFI D MODULE, select ing YES will ret urn t hese set t ings:
I f MODE = HF, t hen:
RFI D POSI TI ON = 1.10
HF SETTI NGS: TAG TYPE = I SO 15693
RETRY ATTEMPTS = 3
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - -
I f MODE = UHF, t hen:
RFI D POSI TI ON = 1.10
UHF SETTI NGS: TAG TYPE = GEN 2; TAG DATA SI ZE = 96- BI T
RETRY ATTEMPTS = 3
Cont rols t he opt ional Applicat or I nt erface Card's GPI O funct ion, where:
Set s t he opt ion t o work wit h a specific device t ype, where:
Disables t he opt ion.
Enables t he following GPI O param et ers for label applicat or funct ions:
•
De- assert s Dat a Ready ( DRDY) when t he last label st art s print ing t o indicat e
com plet ion;
•
FEED allowed at any t im e; and,
•
Does not de- assert DRDY upon PAUSE.
Enables t he GPI O Port t o work wit h a bar code verifier.
Select s t he t ype of input signal required t o init iat e St art of Print ( SOP) , where:
Triggers print ing wit h a low pulse.
Triggers print ing wit h a high pulse.
Triggers print ing wit h a low signal.
Triggers print ing wit h a high signal.
Triggers print ing wit h a signal edge t ransit ion.
Set s t he t ype of out put signal generat ed t o indicat e End of Print ( EOP) , where:
Out put s a low pulse upon com plet ion.
Out put s a high pulse upon com plet ion.
Out put s a logic low upon com plet ion.
Out put s a logic high upon com plet ion.
Select s t he t ype of input signal required t o init iat e label slew, where:
Triggers slew wit h a low signal.
Triggers slew wit h a low pulse.
Triggers slew wit h a high pulse.
Triggers slew wit h a low signal.
Triggers slew wit h a high signal.
3 3