Datamax M-Class Mark II Operator's Manual page 68

I f e x pe r ie n cin g t h is pr oble m ...
Poor print qualit y:
Skips labels w hen print ing:
Unable t o print rot at ed t ext :
Ch a pt e r 6 – Tr ou ble sh oot in g
Tr y t h is solu t ion ...
•
The print head m ay need cleaning; see Sect ion 5.2.
• Adj ust t he Heat and Print Speed set t ings t hrough t he Front
Panel or by host com m ands ( non- display print ers, see
Sect ion 3.4; display- equipped print ers, see Sect ion 4.5.)
• The m edia/ ribbon com binat ion m ay not be com pat ible;
cont act a Media Represent at ive.
• The Media Widt h Adj ust m ent m ay be incorrect ly adj ust ed;
see Sect ion 5.3.
• The Plat en Roller m ay be dirt y or worn; clean or call for
service.
• The Print head Burn Line m ay need adj ust ing; see Sect ion
5.4.
• Media Calibrat ion m ay be needed; see Sect ion 3.5.
• The Media Sensor m ay be out of posit ion; readj ust t he
posit ion; see Sect ion 2.3.
• The form at m ay be wit hin 1/ 8 inch of t he label's t railing
edge. Try reducing or m oving t he form at slight ly.
The charact ers m ay be form at t ed out side t he label
dim ensions. Ensure t he row/ colum n values provide enough
room for t he height of t he charact ers or bar code t o be
print ed. See t he Class Series 2 Program m er's Manual for
det ails.
6 2