Brakes And Direction Lock Functional Checks - GE LOGIQ E10 Basic Service Manual

D 5750007-1EN, R
IRECTION
4-2-6

Brakes and Direction Lock Functional Checks

Table 4-6
1.
Press the left pedal (1) to engage the
direction LOCK.
Press both pedals (1+2) to UNLOCK active
lock(s).
3. Front wheels.
You may need to move the Ultrasound
system around a little to get the wheels to
lock into the locked direction.
2.
Press the right pedal (2) to engage the
Parking brakes.
Press both pedals (1+2) to release
(UNLOCK) active lock(s).
Front wheels (3).
1.
Press DOWN on the brake lever to LOCK.
Press UP on the lever to UNLOCK.
The Rear Caster only brake and can still
swivel. If both Rear Casters are LOCKED,
this will limit how much they can swivel.
4 - 14
. 1
EV
Brakes and Direction Lock Functional Checks
Steps
Front Brakes and Direction Locks
Check that the Front brakes and direction locks function.
Only the Front Casters and brakes are controlled with these pedals.
Only the Rear Casters and brakes are controlled with these pedals.
Section 4-2 - Functional checks
Rear Brakes (brakes only)
LOGIQ E10 B S
ASIC ERVICE
Corresponding Graphic
M
ANUAL