GE LOGIQ E10 Basic Service Manual page 647

D 5750007-1EN, R . 1 LOGIQ E10 B S M
IRECTION EV ASIC ERVICE ANUAL
8-15-2 Assembling or replacing the Roll Stand (cont'd)
9.) Using the 3/16 inch hex wrench provided, fasten the cover plate to the top of the post with four (4)
1/4-20 x 3/8 inch SHCS as shown.
Figure 8-17 Cover Plate Installation
Chapter 8 Replacement Procedures 8 - 401