Operation
5
Operation
5.1
Device operation
Before starting the electric motor, the brushes should be cranked up via the adjustment spindle (1)
(otherwise the machine will start immediately).
The charging capacity of the lithium-ion battery should be checked before each operation of the device.
To do this, open the battery compartment cover on the electric motor and press the button next to the LED
lights
(Picture 1).
If necessary, charge the lithium-ion battery with the charger supplied.
To do this, open the battery compartment cover on the electric motor, press the release button (Fig. 2)
and then remove the lithium-ion battery (Fig. 3).
It is recommended to remove the safety key after finishing work before unauthorized use of the device
(Figure 4).
Important information regarding safety, storage and handling and the like must be strictly observed and
can be found in the enclosed operating manual of the lithium-ion battery.
51700008
Picture 1
Picture 3
V1
Picture 2
Picture 4
9 / 16
GB