Operation
•
To start the electric motor:
first press
①
the start button
and then pull
leave it in this position (Fig. 5). Then release
①.
the start button
•
To stop the electric motor, simply release the start
②.
actuating lever
•
By turning the crank on the adjustment spindle (1
the brush height must be adjusted so that the brushes
touch the paving stone surface.
•
Then engage the crank of the adjusting spindle (1) on
the holder (4).
Otherwise the adjusted brush height could be
adjusted (brush wear)!
•
If the sand is to be slurried into the paving stone joints
when wet, the water quantity can be metered via the
water tap (5) on the unit (EF-H-GREENLINE).
•
In the event of work interruptions, the water supply
can be switched off completely again directly at the
unit (EF-H-GREENLINE) via the water tap (5).
51700008
the start lever and
),
V1
Picture 5
Picture 6
10 / 16
Picture 7
Picture 8
GB